Combination manicures are becoming a popular option for people looking for a full nail care regimen. This method combines a number of techniques to produce beautiful, durable results. Whether you’re a novice or an experienced manicure enthusiast, knowing how they’re done can make you appreciate the artistry.
This method shapes, cleans, and improves nails using a variety of tools and techniques. Every stage, from cuticle maintenance to polish application, is meticulously planned to produce a faultless finish. The combination manicure helps you keep your nails strong and healthy in addition to looking good.
| What is Combination Manicure? | Combination manicure is a technique that combines different methods of nail care, such as classic and gel manicures, to achieve a well-groomed look with long-lasting results. |
| Stages of Implementation | 1. **Preparation**: Clean and shape the nails. 2. **Cuticle Care**: Soften and remove cuticles. 3. **Base Application**: Apply a base coat. 4. **Color Application**: Apply color polish or gel. 5. **Top Coat**: Finish with a top coat for shine and protection. 6. **Drying**: Allow the nails to dry completely or cure under a UV/LED lamp if using gel. |
Features
Three methods of cuticle and nail processing are combined in a combination manicure, though there are some differences:
- Combination, unlike hardware manicure, allows you to remove most of the cuticle with an even cut, and only polish it with a cutter. The result is an even and aesthetic cuticle, barely noticeable on the back roller;
- Trimming manicure implies the removal of growths on the side ridges with nippers. After such a procedure, the skin becomes rougher, and the rate of formation of roughness increases. Combination manicure involves using scissors or nippers only in the area of the cuticle growth, and the side rollers are simply sanded with a milling cutter, remaining smooth until the next procedure;
- European manicure is the most gentle and safe treatment option, but unlike the combined one, it will not be able to cope with strong cuticle growths and rough skin.
Combination manicures incorporate the best practices from each individual technique.
What tools are needed
Milling apparatus. The manicure milling machine requires particular attention because the outcome is dependent on its quality. Avoid choosing low-cost models over higher-end ones, as they perform worse even at high speeds. A decent device should have a minimum power of 60 watts. For instance, the 64 watt Strong 210/105L milling machine has all the modes required for a comprehensive manicure.
Important guidelines for using a milling machine:
- Do not move the nozzle over the same place. As a result of friction, heat is generated, which causes noticeable discomfort;
- Do not work with your hand on weight. The brush must necessarily have an emphasis in the form of its own finger or a client of the client;
- Work intensively, but carefully. Slow movements can also cause an increase in temperature, and also tighten the process;
- Do not be afraid of high speeds. At least 17 thousand revolutions should be set on the device. With the correct setting of the hand and the slope of the nozzle, high speed will not cause any unpleasant sensations.
Phrases. The flame "Flame" with its 23 mm diameter red abrasive ring is perfect for a combined manicure. This multipurpose nozzle is ideal for processing peritive skin and working with cuticles. Every manufacturer uses a ring of the appropriate color beneath the tip to conditionally mark the stiffness of the nozzle:
- The yellow mill is very soft;
- Red – soft;
- Blue – average;
- Green – rough;
- Black – very rough.
Consider the tip shape when selecting a cutter for a combination manicure. Even though a cutter has the same diameter, it may vary in length and form between manufacturers.
There are three components to the tip itself:
- Belly – the most convex part of the nozzle with the largest diameter. Depending on the shape of the cutter, the belly can be exactly in the center or shifted to the base of the tip;
- Nose – the narrowest, pointed part;
- Cheek – the transition of the cutter from the belly to the nose.
The symmetrical shape of the safest and most convenient cutter prevents the widest part of the tip from moving to the base. The cutter tip needs to be pointed.
Pusher. Consider the tool’s overall length when selecting one for a combination manicure; an excessively long base makes work challenging and compels the hand to adopt an unusual position. Shorter options, like Mertz, should be preferred when using a spatula that isn’t too wide.
Cutlery or shears. Choose what you want to prioritize on your own. Keep an eye out for the Nghia brand, which provides excellent factory sharpening on high-quality tools.
Precautions
- Regardless of where you perform the procedure, at home or in a salon, use an antiseptic before starting work. Combination manicure involves working with nippers, which means it is necessary to minimize the risk of infection.
With the combination manicure, you can achieve professional and long-lasting results with a versatile approach to nail care by combining various techniques. This method makes sure that nails stay healthy and look beautiful by customizing the process to each person’s needs.
A precise and effective manicure is possible when the necessary steps are followed, from preparation to the last polish. The combination manicure adjusts to your preferences and style, whether you’re looking to create a stunning nail art design or enhance your natural nails.
Selecting this approach entails accepting a manicure that is adaptable and efficient, offering a fulfilling experience to anyone looking for tastefully manicured nails.
A combination manicure is a flexible technique that combines various manicure techniques to produce a polished, long-lasting finish. It is customized to each person’s specific nail needs by meticulously adhering to prescribed preparation, cuticle care, and shaping procedures, which yields a polished and unique appearance.
