Features and selection of an ultrasonic sink for a beauty or manicure salon

Any beauty or manicure parlor has to make sure that its tools and equipment are kept in excellent condition. Any salon setup would benefit greatly from the addition of an ultrasonic sink, which makes maintaining hygiene and cleanliness simpler. This useful tool thoroughly cleans tools using high-frequency sound waves to make sure they are free of bacteria and residue.

Selecting the ideal ultrasonic sink can have a significant impact on the effectiveness and hygiene of your salon. Given the variety of models available, it’s critical to comprehend the most crucial features, like capacity, frequency, and usability. This post will discuss what to look for in an ultrasonic sink and how using one can help you run your salon more efficiently.

Choosing the best ultrasonic sink can help you improve the hygiene standards in your salon, whether you’re starting from scratch or upgrading your existing setup. Let’s explore the important aspects to think about and identify the ideal match for your requirements.

What is an ultrasonic sink

A device for disinfecting and cleaning instruments from organic residues, plaque, and other contaminants is an ultrasonic sink or bath. By using bursting bubbles and their movement along the working cavity under the influence of ultrasound, the sink modifies the surface of the devices.

Dental offices, manicure parlors, and beauty salons all use compact ultrasonic sinks. Sinks with greater capacity and dimensions are installed in larger businesses where cleaning of instruments or their parts is necessary.

During the disinfection or pre-sterilization cleaning stage, a liquid disinfectant solution (PSO) is used in conjunction with the ultrasonic bath. Compared to a traditional bath or container with a disinfectant solution, the ultrasonic washer disinfects items more quickly. Using a disinfection solution that enables PSO in addition to disinfection can help you further cut down on processing time. Following ultrasonic cleaning, the instrument only needs to be dried, rinsed under running water, and then placed in an autoclave, infrared, or dry heat sterilizer.

Manicure tool pre-sterilization and disinfection: how to select a disinfectant and make the right mixture

What’s in the ultrasonic washer?

• a plastic case;
• a working container made of stainless steel;
• a lattice tray placed inside. Usually it is made of plastic, but some manufacturers prefer stainless steel. The tray is needed to place the instruments and ensure access of waves to each section of the processed devices.

Operating principle

Three operations start to run concurrently in the ultrasonic cleaner’s functioning capacity as soon as it is connected to the network. You can remove dirt and plaque from the instrument by using their combined effect:

• cavitation – creation and collapse of bubbles;
• acoustic flow – movement of liquid due to the action of ultrasonic waves;
• acoustic capillary effect – the process of liquid penetration into hard-to-reach places, achieved due to cavitation.

Since the ultrasonic bath merely cleans instruments of dirt and plaque rather than killing pathogenic organisms, sterilization cannot be replaced. Only appropriate for use during the pre-sterilization and disinfection stages.

Benefits

• allows you to exclude mechanical cleaning of instruments at the stage of pre-sterilization cleaning;
• the process is faster than in a conventional disinfection container;
• the ability to process instruments from different materials. Plastic, metal and glass devices are subject to ultrasonic cleaning;
• Ultrasonic treatment does not dull the instrument, does not provoke corrosion and does not deform;
• high cleaning efficiency.

Drawbacks:

• not every solution is suitable for work due to different flow rates. For effective cavitation, the liquid should be as fluid as possible and best of all water-based, for example, Alaminol. The possibility of using a disinfectant in an ultrasonic cleaner is indicated in the instructions for the drug.

Features of ultrasonic cleaning

• manual cleaning of manicure instruments is traumatic and potentially dangerous – there is a risk of cuts and infection. Ultrasonic cleaning minimizes the contact of the master with sharp and cutting manicure instruments;
• ultrasonic cleaning is more effective in comparison with manual;
• an ultrasonic bath processes the instrument faster than when the master does it manually in a regular bath or box.

It’s important to prioritize features that improve efficiency and cleanliness when selecting an ultrasonic sink for a manicure or beauty salon. To handle different tools and materials, look for models with adjustable settings, a large enough capacity to meet your needs, and durability to withstand regular use. Keeping a clean and efficient salon environment requires dependable performance and an easy-to-clean design.

Characteristics

• range. The range of waves of the bath for manicure tools should fluctuate from 35 to 50 kHz;
• capacity. To work with manicure tools, purchase a sink with an internal volume of 0.5 to 2.5 liters. A bowl of this volume will reduce the consumption of disinfectant solution;
• quality. Make sure that the working container is made of stainless steel. Due to cavitation and frequent use of aggressive disinfectants, low-quality material corrodes faster, wears out and becomes unsuitable for use;
• heating function. If the bath will be used for pre-sterilization cleaning, heating the water will increase the effectiveness of this procedure;
• ultrasonic frequency. Some models provide for regulation of this frequency. If the sink you like does not have such a regulator, make sure that the frequency of the ultrasonic wave is not less than 35 kHz;
• legs. Some models are equipped with rubberized feet that ensure the stability of the device on the surface;
• timer. Make sure you have a timer that will automate the process and not be distracted by monitoring the device.

When purchasing, focus on the accompanying paperwork. The apparatus needs to be approved in Russia and have a Roszdravnadzor medical device registration certificate. On the State Register website, you can verify the sink’s registration. These SanPiN 2.1.2.2631-10 requirements apply to disinfection and sterilization devices.

Requirements for a disinfectant solution

Select a disinfection solution that satisfies the required criteria to boost its efficacy. Certain liquids are less effective at ultrasonic cleaning because of their environment, which prevents the cavitation process from developing:

• choose a solution that is not too aggressive. Under the influence of ultrasound, the effectiveness of the solution increases along with its aggression, which can negatively affect the condition of the instruments;
• it is desirable to have anti-corrosion additives in the disinfectant;
• it is better if the disinfectant solution is made on the basis of water, and have surfactants as active components.

Recommendations for ultrasonic bath solutions:

• Alaminol;
• Aquistin;
• Brilliant;
• Desolon;
• Blanizol.

Examine the composition, cavitation, and ultrasonic wave conductivity indicators of alternative solutions before selecting one.

More details on choosing disinfectants:

Instructions for use

1. Fill the working container of the ultrasonic bath with solution or water to the maximum mark. The less liquid is poured, the lower the cleaning efficiency;
2. Put the tools in the basket included with the sink. It is recommended to lay out the devices in 1-2 layers. Fix the tray in the working cavity of the sink;
3. Plug the device into the network;
4. Set the timer and wait until the cycle is complete. A timer is usually set from 3 to 5 minutes, depending on the contamination of the processed devices. The temperature, if possible, should not be higher than 40 degrees;
5. Drain the solution and rinse the instruments under running water.

The instruments can be sterilized in an autoclave, dry heat sterilizer, or infrared sterilizer once they have fully dried. It is crucial to remember that as soon as sediment and turbidity start to appear, the ultrasonic cleaner’s solution needs to be replaced.

A few tips

• Do not place instruments on the metal bottom of the bath – this affects the quality of radiation and the overall efficiency of the device. All models have special trays and containers. This rule is excluded if the manufacturer allows such use. For example, in the UltraEst-M ultrasonic cleaner, instruments can be placed directly on the bottom;
• after pouring in fresh solution, degas it. To do this, turn on the sink for 3-5 minutes without a tool, but with a solution. Degassing increases the cleaning efficiency;
• test the bath for operability at least once every 2 months. Use regular food foil to check. Pieces measuring 10*20 cm are placed in a tray – one in the center and two on the edges. The tray is lowered into the sink, the cleaning process starts. If after the end of the cycle the foil is deformed – wrinkled or torn, then everything is fine with the ultrasonic bath.

What not to do:

• turn on the ultrasonic bath without liquid – water or solution;
• keep the device on all the time. Firstly, the solution evaporates, secondly, the elements of the device overheat;
• use the bath with flammable solutions.

Rating review

Ultrasonic chamber CODYSON CD-4820

• Production: China;
• Dimensions: 29*23*18 cm.

Benefits

• warranty from the manufacturer 6 months;
• 5 operating modes;
• Digital display.

Ultrasonic washing Ultraest-M

The Russian-made Uz-Wandered product line is intended for the processing of dental, manicure, and cosmetology instruments. Capacity: 1.6 liters.

Size: 26 by 18 by 16 cm.

Benefits

• the ability to place tools directly on the bottom, without using the tray;
• Timer from 1 to 15 minutes.

Drawbacks:

• Small capacity at a high price.

Ultrasound bath SD – 2000

In addition to being useful for home use, a small bath measuring 20 by 13 by 15 centimeters and holding 0.6 liters of water is ideal for cleaning jewelry such as bracelets and chains.

Benefits

• timer;
• screen;
• 6-month warranty.

Ultrasonic cleaner Elmasonic S10

Metal, plastic, and glass instrument processing is appropriate for this 0.8 liter German-made ultrasonic cleaner. constructed from premium stainless steel.

Outside measurements: 20 by 15 by 13 cm.

Benefits

• automatic degassing mode;
• short-term and endless cleaning modes;
• overheating fuses with automatic shutdown after 12 hours from the moment of start-up.

Drawbacks:

Elmasonic S10 is too expensive for small offices to purchase, so large beauty and cosmetology salons are advised to purchase it instead.

Euronda, Eurosonic Energy Ultrasonic Cleaner

Measurements: 27*24*22 cm

Benefits

• sound -absorbing cover;
• capacity;
• the ability to combine 2 types of solution in one cycle.

Drawbacks:

• weight – empty washing weighs 3.7 kg;
• price – for Italian quality will have to pay from 30 to 40 thousand.

The Italian model lasts a long time and is generally well-reviewed, despite its high cost. We advise anyone who has the funds to purchase Eurosonic Energy.

Irisk, ultrasonic bath

The least expensive model available today from the Irisk line of manicure and pedicure products. possesses a 0.75 liter tank and multiple programmed modes.

• Production: China;
• Dimensions: 16.5*13*6 cm.

Benefits

• low price;
• compactness;
• Timer from 1.5 to 7.5 minutes.

Due to its compact size and affordable price, the Irisk ultrasonic sink is ideal for a private master.

Elamed, Ultrasonic Washer UZO1-01 Medel

A product from a Russian medical equipment manufacturer. An installation with an ultrasonic emitter in the upper section and a working container in the lower part is called an unusually shaped wash. Although Medel is used in medical offices, it would be ideal in the office of a cosmetologist or manicurist.

• Volume: 1 l.
• Dimensions: 43*52*50 cm.

Benefits

• timer from 1 to 10 min. with an interval of 1 min.;

Drawbacks:

• dimensions and weight – almost 6 kg;
• high price.

Are you an ultrasonic bath user? Put your comments about your experience here!

Share with friends!

Popular on the topic Business Tools

Registering a health book

Stock and sanitizing supplies for a salon

Promising manicure artists

Why is call tracking necessary for a beauty salon?

Interior and space zoning of beauty salons

Agreements with salon staff: we draft them accurately

The features, options, and operating guidelines of an autoclave

How to pick a cash register online for a beauty parlor

How to use and choose a straightening comb

How to start a beauty coworking space both on your own and through a franchise

Magazine Sections

Express your opinion or ask a question! Cancel reply

One comment on “Features and selection of an ultrasonic wash for a beauty or manicure salon”

Ivan

The titanium ultrasonic baths are other deserving baths. One of mine has a six-liter degassing system. an advantageous thing. I use it in the garage to clean various automotive components, and it’s useful in daily life.

Feature	Description
Size	Choose a size that fits your salon space and needs. Larger sinks can handle more items at once but take up more space.
Frequency	Higher frequency settings can clean more effectively. Ensure the sink has adjustable frequency to suit different cleaning tasks.
Capacity	Check the capacity to ensure it meets the volume of tools you need to clean. A larger tank is better for bigger salons.
Build Quality	Look for durable materials like stainless steel. Quality construction ensures longevity and better performance.
Controls	Intuitive controls make it easier to operate. Look for a model with clear settings and easy-to-use buttons.
Warranty	A good warranty provides peace of mind. Check the length and what it covers to ensure you"re protected.

Maintaining efficiency and hygiene in your beauty or manicure salon can be greatly impacted by the ultrasonic sink you select. Your tools will be thoroughly cleaned and free of bacteria and residues thanks to the gentle yet effective cleaning solution provided by these sinks. Investing in a top-notch ultrasonic sink will improve your salon’s overall cleanliness as well as the quality of your services provided.

Size, frequency, and durability are important considerations when choosing an ultrasonic sink. If your salon is busy, you might need a larger tank, and a higher frequency can yield a more delicate cleaning. To make sure the sink suits your needs, look for features like easy maintenance and adjustable settings.

You can spend more time focusing on your clients by streamlining your cleaning procedure with the help of an ultrasonic sink in your salon. It’s an investment well worth making because it blends practicality with efficient sanitation, assisting you in keeping a safe and professional environment for your clients and yourself.

Video on the topic

Codyson ultrasonic washers: choosing the perfect option

Ultrasonic bath (ultrasonic wash) how to choose and buy? Ultrasound and sterilization

Ultrasonic wash with WB

Choosing a narrow sink for manicure ❗️ 4 factors 👌🏻