Cuticle milling cutters. How to process cuticles with a device?

When it comes to nail art, you’ve undoubtedly heard a lot about hardware cuticle removal if you’re new to the world. It’s a common technique to maintain healthy, well-groomed nails, but if you’ve never used it before, it might seem a little strange. In order to achieve a precise and clean finish, this technique basically entails using a special electric tool to gently remove the dead skin around your nails.

Selecting the appropriate cutter for the task is crucial to becoming proficient in this method. Cutters are available in a variety of sizes and forms, each intended to handle a specific job. Having the right cutter can make a big difference in the outcome and your comfort level during the process, regardless of whether you’re working with thicker, tougher skin or delicate cuticles.

This post will explain how to choose the ideal cutter for every situation, streamlining and streamlining your nail care regimen. We can help you comprehend the various kinds of cutters that are available and know how to use them safely. Are you prepared to up your manicure game? Now let’s get started!

Situation	Recommended Cutter Type
Removing thick cuticles	Flame cutter with a rounded tip
Cleaning the nail fold	Needle cutter
Polishing the cuticle area	Ball-shaped cutter
Preparing for a manicure	Cone cutter
Delicate cuticle removal	Small cylinder cutter

Contents

Hardware cuticle treatment: how to do it and what are the advantages
How to properly remove cuticles with a device
Cuticle Cutters: Photo Review
Video on the topic
Cuticle cut with a ball / hardware cut / without acceleration / cuticle cut without acceleration / hardware manicure
Corundum cutter for real manicure professionals
The coolest REVIEW OF CUTTERS ✅Which cutters to choose for manicure and pedicure ✅Cutters for manicure and pedicure
How to choose cutters for hardware manicure? Which are better?
Cutters for manicure for beginners
SUPER-DETAILED about HARDWARE MANICURE step by step. ERRORS. Hardware CUT OF CUTICLE, selection of cutters
Cutters for hardware manicure. How to work without PROPILOV!

Hardware cuticle treatment: how to do it and what are the advantages

The removal of the cuticle with hardware is similar to the European manicure. Unless prior skin softening is not required, only the dead skin areas are carefully removed during this procedure, leaving the cuticle intact. Cuticle remover treatment for hands should only be applied dry. The main idea is to remove the cuticle surrounding the nail using a specialized cutter.

Image sourced from vseonogtyah.ru

There are numerous benefits to such a process:

Hardware nail treatment takes less time. On average, with sufficient experience, all nails can be put in order in 30 minutes. While a classic trim manicure can take up to 1.5 hours.
The cuticle machine is safe in terms of possible injury and infection. A cuticle cutter essentially just exfoliates dead skin cells, while a trim manicure also affects “live areas”, which often leads to bleeding, hence the risk of infection.
Hardware cuticle removal does not require preliminary work. In this case, there is no need to steam the skin, apply softening agents or remover to the cuticle. Everything is done on dry skin.
Hardware manicure is a more delicate process and is an ideal option for people with thin cuticles or for those who have close blood vessels.
Also, a cuticle machine is an ideal option for processing rough areas of the skin, where trimmed, and especially European manicure cope with difficulty.
The cuticle after hardware removal grows back much more slowly, and there is no risk of hangnails.

Image sourced from manikyrru.tumblr.com

Despite all of the benefits of this manicure technique, it is important to consider the drawbacks as well:

If you use a cutter for cuticle processing ineptly, there is a risk of injuring the nail plate, up to its complete perforation.
Not a clean enough result. Many people have quite voluminous cuticles and in order to give their hands an aesthetic look, it is better to cut them off.
High cost of the device itself. Unlike the edged and non-figurative manicure options, for hardware cuticle removal you will have to purchase an expensive device and additional milling cutter attachments.
A more complex procedure for caring for the equipment. Cuticle milling cutters require constant hygienic care. They must be cleaned and disinfected in a timely manner, but inept handling can lead to the fact that they can simply be damaged, and this will result in additional expenses.

In their work, many manicurists choose to blend different cuticle processing methods. They frequently use a remover to get rid of the cuticle, but they also like to cut it off. The most crucial task, which is to remove the pterygium, is best completed with a cuticle milling cutter. In any case, the outcome is more important than the method used to get there.

How to properly remove cuticles with a device

Don’t believe that a beauty salon is the only place where hardware cuticle removal is feasible. You can purchase cuticle processing machines that are safe for use at home from any home appliance store or specialty studio store. They only differ in a limited number of attachments and power from professional ones. Lower power is safer, though. Selecting a machine with a speed of at least 2000 rpm is crucial. This is sufficient to complete the task neatly.

Image sourced from medaboutme.ru

The bare minimum set of attachments will do, and if you’d like, you can purchase the missing cutters.

The following steps are involved in the cuticle removal procedure:

The cuticle is lifted and pushed back to the base of the nail bed. Then the keratinized layers of skin are carefully cleaned off with a cutter.
Next comes one of the most important jobs – removing pterygium. Here you will need to act delicately and with great caution, because the work is carried out in close proximity to the nail plate. The pterygium must be removed carefully, moving the cutter almost parallel to the nail, without pressing on the plate itself.
After the pterygium is cleaned, you can start working on the lateral ridges and sinuses. All burrs and microcracks are also carefully sanded.
At the final stage, the fingertips are processed – all keratinization and calluses around the nail are removed, as well as in the subungual area, if any.

Image sourced from rc-garaj.ru

When working on the cuticle, the following guidelines should be adhered to:

Carry out work at speeds of 15,000 – 20,000 revolutions. It is at this power that the keratinized layers are quickly and efficiently cleaned off and there are no unpleasant sensations.
You cannot linger in one place for more than 4 seconds. – there is a risk of burning the skin.
Do not press the cutter on the skin and nails, otherwise you can cause a wound.
For each treatment area, use the appropriate cutter option (more on this in the next section of our review).
When working with the cutter, you should direct it in the opposite direction from its movement. It is with this technique that keratin and dead skin cells are removed.

To cut off the cuticles on your hands and feet, use different cutters. First and foremost, sanitary concerns demand that this requirement be followed. Toes gather more debris and bacteria than fingers, and by using the same cutters, you run the risk of spreading a fungal infection or infection from your feet to your hands. Second, while the cuticle on hands requires a finer grain surface of the cutters, the cuticle on feet is rougher and will require cutters with a more abrasive coating to process. Damage to the fingers’ delicate areas can result from rough abrasion.

Cuticle Cutters: Photo Review

Those who have recently become the happy owners of a manicure machine and those who are just looking at such an acquisition are probably confused when they see a wide variety of attachments for the machine. Let"s ignore those attachments that are needed for nail care and shaping, and take a closer look at which cutters are needed for cuticle processing. Let"s make a reservation right away that in our review we will only consider attachments that can be used to process cuticles at home. Professionals work with more complex devices, and this requires special skills and training. Cutters for home use are safe, but, nevertheless, if all technology is followed, they give a good result.

Image sourced from manikyrru.tumblr.com

So, what "specialization" does cuticle processing require in terms of cutters? Perhaps as you get more experience, you’ll need a much smaller set, or you’ll figure out a universal solution for yourself. While you are learning how to use the device and developing your skills, you should make use of each type of attachment for the intended purpose. A picture is included beneath each description of the cuticle cutter for better understanding:

Ball-shaped cutter. Used to remove small calluses and treat cracks on the fingers. This type is very convenient when working with areas close to the nail plates. This design allows you to delicately remove unevenness and keratinization without touching the surface of the nail. This cutter is also used to remove the keratinized layer from the cuticle.

Image sourced from nailrose.ru

The cuticle lifter has the shape of an inverted cylindrical cone with a blunt end. It can also be used to clean the nail plates from delamination and remove pterygium.

Image sourced from evanails.com.ua

A cylindrical cutter with a narrow tip will allow you to process the nail sinuses, and is also suitable for removing pterygium. This attachment has two types – with a sharp and rounded tip. A cutter with a sharp tip does the job cleaner, but it is not recommended for beginners. A nozzle with a rounded tip is less traumatic and more suitable for those who are just starting to master the technology of hardware manicure.

Image sourced from dereksiz.org

A cutter with a flat cylinder allows you to clean off dead skin from the side ridges.

Image sourced from nogotok-shop.ru

Cutter variations include not only configuration but also material composition. They may be silicon, ceramic, silicon, or diamond.

Silicon and ceramic nozzles are some of the cheapest in the price category. They are included in both professional devices and devices for home use. Such attachments have different degrees of abrasiveness and are suitable for processing rough surfaces of the fingers and for shaping nails, and are also used for delicate areas.

Image sourced from Slayyyer.ru

Diamonds – used for delicate work, where you need a chiserable effect, for example, the area of the nail sinuses and phergy. Truzs with diamond spraying are one of the most expensive, but have the highest degree of wear resistance. More often included in a set of professional devices. In apparatus for home use, if such nozzles are included, then they have a rounded or mowed tip. This is due to safety requirements.

Image sourced from uzbechka1.ru

Silicone (or their analogues of felt) are used for grinding and polishing nail plates. Have a fairly fast wear period, however, their cost is low.

Image sourced from Shaalenakrasa.Com.UA

Cuticle removal works best with ceramic and diamond mills. The thickness and stiffness of the cuticle determine which cutter is best for removing it. Ceramic: better suited for cuticles that are rough and fleshy. If the cuticle is extremely thin, which cutter should be used? Only an attachment with finely divided diamonds will be helpful here. In any event, you should ideally have two kinds of cutters when working with the cuticle: silicon or ceramic for quickly removing keratinization and diamond for making the last correction.

The removal of hardware cuticles has revolutionized the field of manicures and pedicures. It provides an easy, accurate, and fast way to maintain the best-looking nails. At home or in the salon, you can attain professional-caliber results with the appropriate tools. These tools’ technology minimizes discomfort and damage risk while ensuring a more seamless and comfortable experience.

It’s important to select the appropriate cutter for your needs. Different kinds of cutters are needed for different occasions. A simple yet well-made cutter will suffice for regular use. Use precision tools made for complex tasks if you’re getting ready for a special occasion or require a more meticulous touch. Always think about the cutter’s quality and fit for your particular nail type and cuticle condition.

In conclusion, your nail care regimen may significantly improve by making an investment in the appropriate cuticle removal hardware. Whether you want a detailed finish or a fast touch-up, there is a cutter for every need thanks to the variety that is available. You can maintain your nails looking amazing and your cuticles under control by choosing the right tools and applying them properly.

Hardware cuticle removal is revolutionary when it comes to getting a perfect manicure or pedicure because it offers efficiency and precision that traditional methods frequently fall short of. Whether you’re keeping your nails at home or getting ready for a special occasion, we’ll go over how to select the best cuticle cutters in this post. We’ll go over the essential characteristics of cuticle tools and offer advice on how to use them properly to maintain the best-looking nails.