How threading is done – eyebrow correction with thread

A common technique for defining and sculpting eyebrows is threading. This method, which has been employed for centuries, is renowned for its accuracy and potency. As opposed to waxing

What is threading

The process of threading involves using thread to adjust eyebrows. This technique was first popularized in Asian nations and only recently spread to eyebrow specialists in the West.

A special thread, usually made of high-strength cotton, is used for threading. Capron examples are less prevalent.

The master’s preferences determine which kind of thread is selected. When purchasing, keep in mind that cotton threads can become stuck, but nylon threads are denser and slide more easily. In addition, eyebrow correction is performed on both kinds equally frequently.

Making a loop that, when in motion, grabs and pulls out hairs is the essence of threading. We will address the proper way to create a loop at a later time, but for now, let’s review the advantages and disadvantages of the approach.

Threading your eyebrows has advantages.

• long-lasting effect. Like wax, thread helps to remove hairs from the root, which means that at least 2-6 weeks will pass before new hairs grow back;
• speed of work. Point work with tweezers takes time, while thread allows you to process all problem areas in just 10 minutes with the existing skill;
• no risk of introducing an infection or bacteria. By the way, this is about tweezers, which can be sterilized, or they may not. Use the thread and throw it away and you don’t need to think about processing, sterilizer and disinfectant;
• no allergic reactions – this plus is opposed to wax, which can cause allergies. There is practically no irritation after threading;
• removal of even thin, light hairs that are not visible to the eye. Since the work is aimed at the area, and not at a specific hair, even small vellus hairs are removed during eyebrow threading.

Drawbacks:

• pain. Especially at first, the procedure can cause significant discomfort. The severity of the pain gradually disappears, as a habit is developed, but initially the client may not be comfortable;
• skin damage. During the movements of the thread, it touches the skin, scraping off the upper layer of the epidermis. Somewhere this feature of the procedure is considered a plus – supposedly, peeling is removed, but in fact this fact can negatively affect the condition of the skin and even leave micro-wounds or scratches.

2 devices for threading

Devices for threading immediately started to appear in stores as soon as the technique became popular among the masters and their clients. China, along with its two biggest online marketplaces, Taobao and Aliexpress, have set themselves apart in this regard.

1. Electric epilator. It works on the same principle as manual threading, but the device always maintains the required thread tension, which allows you to do the job cleanly;

1. Manual epilator. The device is similar to the previous one, but it is set in motion by squeezing the handles.

If you’re not planning on purchasing any more devices, continue reading for instructions on classic threading.

How to twist the thread correctly

At first, it appears that you need to know a lot of intricate information to twist, but all you really need to do is try once, and then there won’t be any more questions.

How the thread should be twisted for threading:

1. Measure about 40-50 cm of thread from the common spool;
2. Tie the ends together several times so that the knot does not fall apart during work;
3. Take the loop in both hands and twist 5-7 times. Choose the number of twists according to the situation – for thick hair you need 7, if your hair is thin, then 5 will be enough. If anything, the twist can be adjusted during the procedure;
4. Check the functionality of the loop – to do this, open the fingers of one palm. If you did everything correctly, then the twist from the center will move to the opposite hand. It is the moving knot that pulls out the hairs, catching them on its way.

The knot must be moved against the direction of hair growth in order to remove hairs.

Step-by-step instructions

Methodical threading:

1. Cleanse your skin – remove makeup with micellar water, cleanse your skin of dirt with lotion or use shampoo;
2. Treat the area of ​​\u200b\u200bthe future threading with an antiseptic. You can use a special one, but if you don"t have one, chlorhexidine will do;
3. Highlight the hairs with talc – lightly sprinkle the correction area with white powder to highlight the hair;
4. Take the prepared thread, twist it as indicated in the previous section. In one part of the loop, the index finger and thumb of your left hand, in the other – the same fingers of your right hand;
5. Move the central knot to one side of the loop and surround the place where you plan to remove hairs with the next movement with a small part of it;
6. Confidently and quickly expand the fingers of the hand where the loop is small, moving the twist in the opposite direction. As you move, the knot will grab the hairs and pull them out. Repeat until you achieve the desired result.
7. After the procedure, use a soothing cream, lotion or a special product after threading, like the CC Brow brand.

Everyone selects the hair removal plan that works best for them. The easiest place to start is the nose bridge. From there, you can work more precisely under the eyebrow or, on the other hand, work more complexly above the eyelid and finish between the eyebrows.

A thin, twisted cotton thread is used in the precise and age-old technique known as "threading" to remove unwanted hair at the follicle level from the eyebrow. This technique offers a natural look with little to no skin irritation and works especially well for shaping eyebrows. It also allows for sharp, defined lines.

Precautions and contraindications

There are several precautions that must be followed when threading:

• don"t try to grab all the hairs of the selected area at once – it will hurt, and there is also a risk of provoking redness and irritation. Work in small sections, 3-5 hairs;
• practice before the first procedure. You can use your hand or imitate movements near your face without touching the skin;
• do not touch the skin with your hands after the procedure unless necessary. After such depilation, the epidermis is susceptible to penetration of bacteria, which can provoke irritation. After the procedure, try to maintain careful hygiene for 24 hours.

Restrictions:

• increased skin sensitivity. If the skin is susceptible to external factors, then threading can cause redness and even injuries in the form of cuts;
• irritation, increased dryness and inflammation – thread movements can aggravate the problem;
• moles and papillomas in the depilation area. Volumetric neoplasms can be damaged by the thread, which can provoke complications. In such cases, it is better to refuse the procedure;
• open wounds and abrasions. It is recommended to refrain from the procedure until complete healing, so as not to cause pain and not to introduce an infection or bacteria during the procedure;
• skin diseases in the acute stage;
• pregnancy. It is recommended to refuse the procedure for girls who have not previously used the threading technique and decided to try the method in the position.

Questions

Is it feasible to complete the process at home using standard sewing thread?

You could try, but bear in mind that it will take some getting used to using regular sewing thread because it can be challenging to "manage." Avoid using synthetic thread as it will become electrified during friction and cause uncomfortable sensations.

Which is better to say, trading or threading?

Among the most contentious topics is this one. The procedure is referred to as threading because it is similar in nature to threading with products, as seen in the price lists of eyebrow artists.

When discussing accuracy, we should refer to the English word "thread," which is pronounced [\�red]. In this instance, threading makes more sense.

Is the thread limited to correcting eyebrows, or is it useful for other purposes as well?

The entire face is threaded, including the chin, neck, above the lip, cheeks, and eyebrows.

Which thread manufacturer is better for a beginner to purchase?

There is no idea—there are threads for experts and novices. Here, you should pay attention to how you feel and how comfortable you are during the process. It is advisable to experiment with multiple manufacturers. CC Brow, Barbara, Henna Expert, and Novel are the best among them.

Can the process be completed at home?

Of course, but the first time around, you probably won’t get the best outcome. Be aware that the initial thread-plucking of the eyebrows will take a while. See the master once to gain an understanding of the process and prevent errors if you have no idea about it at all.

Why does the thread break during the process so frequently?

There are two choices. First, the thread is of poor quality; consider switching manufacturers. Second, the knot is being pulled too tightly. Instead of applying as much pressure to the thread, try to concentrate on the twist’s speed.

Share with friends!

Popular on the topic Eyebrows

Everything about stencils for eyebrows

Recognizing fused eyebrows

Selecting and applying the right eyebrow tint

Important information for an eyebrow artist’s client: a memo

An evaluation of eyebrow lipsticks

How to match your face type with the appropriate eyebrow shape

How to use a pencil to draw eyebrows

An analysis of all brow-growing techniques

How to massage your eyebrows to grow them in

How to use paint to dye your eyebrows

Magazine Sections

Express your opinion or ask a question! Cancel reply

Step	Description
1	Clean the eyebrow area to remove any makeup or oils.
2	Choose a thin, high-quality thread (like cotton) and cut a piece about 12 inches long.
3	Twist the thread in the middle several times to create a loop.
4	Hold the thread ends with your fingers, keeping the twisted section in the middle.
5	Place the twisted section of the thread against the area of unwanted hair and use a scissor-like motion to pull the hair out from the root.
6	Repeat the process for each section of the eyebrow, shaping it according to your desired look.
7	Cleanse the area again and apply a soothing gel or cream to reduce any redness.

For precise and natural-looking eyebrow correction, threading is a popular technique. This technique shapes your brows with the least amount of discomfort by removing unwanted hair with a simple thread.

Threading is a popular method because it is quick, chemical-free, and appropriate for all skin types. You’ll have exquisitely shaped eyebrows that accentuate your facial features, but it may take some practice to get the hang of it.

It’s a good idea to see a professional if you’re thinking about threading for the first time in order to achieve the desired shape. You may find that threading becomes your go-to brow maintenance technique after you see the results.

Video on the topic

Eyebrow correction with thread | Threading Pros and cons of the procedure

How to give a beautiful shape to eyebrows? Unique technique of threading eyebrows with a thread

Threading eyebrows with a thread

How to remove hair from the face with a thread

What is THREADING? How to do eyebrow correction with a thread? BROVIST MINSK

HOW TO REMOVE HAIR FROM THE FACE WITH A THREAD ?

Threading. Eyebrow correction with a thread

Eyebrow correction with a thread