How to properly use the device for manicure

At-home nail care can be more effective and easier with the use of a manicure tool. But knowing how to use your device properly is essential to getting the most out of it.

Understanding the various attachments, speeds, and techniques is essential to getting salon-quality results without breaking your nails.It’s not just about turning it on and filing your nails.

This tutorial will take you through the necessary actions to operate your manicure tool safely and effectively, giving you the best results each and every time.

Rules for putting the milling cutter into operation

When buying a milling cutter for manicure, it needs to be "run in" right away:

1. With a milling cutter or plug, turn on 10,000 or 15,000 revolutions and leave for 12 minutes in one direction;
2. After that, turn it off, switch to reverse mode;
3. Using the same principle, run the device in the other direction.

This is required to prevent potential issues with continued use at high speeds by grinding the brush motor and bearings.

To prevent the three-petal collet’s clamp spring from stretching, you must always replace the factory plug or use a clean cutter when the machine is left idle. The collet may eventually become difficult to close and open if the handle is left open without a plug. Additionally, when working on nails, dust gets inside and gets into the bearings, causing the handle to vibrate, make noise, and burn.

The forward and reverse modes cannot be changed while moving. Certain machines are designed to prevent situations like this; they will stop the cutter on their own and then accelerate it in the opposite direction. The machine may become burned out if it lacks such a feature. Since the forward and reverse modes are not changed frequently, switching shouldn’t be too difficult.

Every six months, the milling cutter needs to be brought in for cleaning and maintenance. Every machine eventually experiences parts wear and tear. They have to be modified. These parts include bearings. Replacement for professional models is covered by warranty free of charge or at a nominal cost.

How to insert a cutter

There is a moving and fixed part to the handle. The three-petal collet opens when you scroll the movable part until it clicks, allowing you to insert a plug or remove one cutter to switch to the second one. To fix the attachment, the movable part is then scrolled in the opposite direction once more.

It is necessary to insert the cutter into the handle until it stops. We concentrate on the cutter’s color mark for handles that have deep grooves. It is preferable to avoid installing it the deeper the mark. The device is easier to manipulate and more precise when the cutter tip is closer to the handle. Additionally, this stops misalignment and vibration.

You can set a low speed, hold the cutter in your hand, and watch which way it "runs away" to determine which rotation mode is active. The forward mode is if it is to the right; if it is to the left, it is to the reverse.

How to sit correctly when working with the device

There are a few basic guidelines for sitting, hand movement, and finger position that must be followed in order to prevent cramping of the muscles and obstruction of fine hand movements while working.

Positioning of the body and chair:

• Posture should be straight, the back should not be hunched, breathing should be free;
• The chair and table are selected in such a way that the back remains straight;
• The working hand should remain mobile, not rest on the elbow, so as not to overload the hands and not block the fine motor skills of the fingers;
• It is better to lean on the table with the forearm;
• Do not work with your hand hanging or on your elbows in order to have maximum control over the accuracy of the actions.

In order to obtain the support needed for manipulations during a hardware manicure, we grasp the client’s finger with the left hand, index finger, and thumb, bend the other three, and place the little finger—or even the entire lower portion of the working finger—on them.

Like a ballpoint pen, the device’s handle should rest entirely on the groove formed by the thumb and index finger while supporting all of its weight. Instead of using our entire hand to control the cutter, we use our fingers.

Kindly pose inquiries regarding the functioning of cutters in the comments section, and we will make an effort to address them in the revised version of this post.

Share with friends!

Popular on the topic Hardware Tools

What hardware manicure is and what aspects of its execution

Pusher types: a comparison, features, and operating guidelines

The top hair dryers for use in salons

Examples of criteria to consider when selecting a manicure table

Scholl electric roller file for smoothing away rough foot skin

Germany produces the best hardware pedicure cutters.

Selecting eyebrow tweezers

The top 11 scalp massagers to prevent hair loss

Review of stamping supplies and equipment

The ideal hair tongs and curves

Section of the magazine

Express your opinion or ask a question! Cancel the answer

4 comments on “How to use a manicure apparatus correctly”

Elena

Greetings for the afternoon. If the man was initially perplexed by the forward and reverse regimes, is the milling mill deemed defective?

Editors

Hi there, Elena! Any changes to the apparatus’s functioning that go against its stated qualities are marriage.

Tatiana

Could you please clarify if you must always turn on the turntables quickly? or, if I operate at my fastest speed, flip the button?

Editors

Tatyana, hi there! Sadly, we were unable to comprehend the question. A cutter is required as the solution. Devices typically have two governing bodies, which you are free to use.

You can increase the effectiveness and enjoyment of your nail care routine by learning how to use a manicure device properly. You can get professional-looking results at home by following the instructions and advice provided.

Always begin the task with dry, clean hands, and select the appropriate attachments. To prevent damage, move the tool lightly across your nails without exerting excessive pressure.

You’ll quickly notice a discernible improvement in the condition and look of your nails with consistent practice and device maintenance.

To maintain the health and beauty of your nails while getting salon-quality results at home, it’s imperative to use manicure tools correctly. The fundamentals of configuring the device, choosing the appropriate attachments, and using the right procedures to prevent common errors and safeguard your nails will all be covered in this tutorial.

Video on the topic

Hardware Manicure Macro 🧐 Step by Step For Beginners

IN DETAIL about HARDWARE MANICURE yourself! Manicure cutters 👌

How to use a manicure machine? How to change cutters and directions.