Nail lamination – procedure and review of products

A growing number of people are turning to nail lamination as their go-to procedure for stronger, more attractive nails. During this process, specific products are applied to the nails to protect and nourish them and give them a glossy, healthy finish. Lamination can be a fantastic choice if you want to improve the natural look of your nails or are dealing with weak or damaged nails.

With the correct products, the relatively easy procedure can be completed at home or in a salon. Nail lamination kits come in a range of brands, each with unique advantages. These products, which range from protective coatings to nourishing serums, are meant to make your nails look smooth and polished while also improving their general health.

This post will go over the exact steps involved in nail lamination and provide reviews of some of the most well-liked products on the market. Whether you’ve never had this treatment before or want to change up how youtake care of your nails, you

The essence of the procedure

Applying a glossing product to them is called nail lamination. There is use of gels, powders, minerals, polishes, and waxes.

By "sealing" the plate, they shield it from impacts from machines. A layer of protection forms on the surface to strengthen the original bed and stop chips and breaks from occurring from additional mechanical impacts.

The most widely used lamination material is LCN’s Natural Nail Boost Gel.

• Boost gel is an acid-free gel polish that forms a non-greasy layer in the form of a base.
• The layer does not dissolve, does not enter into a chemical reaction with other substances.
• During correction, it is not filed down, is not removed with cutters or files.

The composition of acid-free bases for extensions differs from that of primers and bases for extensions. Boost gel is intended to shield the plate while it is being designed, extended, and gel polished. Nail preparation and improved natural plate adhesion with artificial material are achieved through the use of primers, bonders, and auxiliary products.

Lamination is another application for gel glossing, which includes mineral additives:

• The composition is more gentle than regular boost gels, suitable for working with any type of nails.
• May contain keratins, diamond spraying. The properties of such substances allow you to treat the nail simultaneously with the wearing of artificial nails.

The purpose of the polishes and waxes used in lamination is to protect and reinforce the plate:

• The composition contains an alternative component to gelatin, which nourishes and moisturizes the plate;
• Wax adds shine and strength, but does not form a protective "crust" that would protect the nails from chipping.

Groups A and E vitamins and oils, which are present in wax and polish, contribute to the plate’s strength.

Why the procedure is needed, indications

Nail therapy lamination is required to fortify the structure. Any kind of plate can use this procedure.

It will be advantageous prior to applying gel polish or extensions:

1. The wearing period of the coating will increase due to the strength of the nails: they will stop breaking, there will be no chips or peeling.
2. The laminated nail does not bake in the lamp after the sawdust, adhesion when applying a bonder increases due to the adhesion with the material based on the gel.
3. When covering long nails with gel or gel polish, the probability of cracks or breakages is minimal.

Those who damaged their nails after wearing acrylic materials for an extended period of time can also benefit from this procedure. Regular polish works well with boost gel as a base. It can be used by people who bite their nails and left on the nail for a period of 14 days without any coating.

Following laminate, the nail plate

• has a healthy appearance;
• becomes flexible and smooth, which prevents cracks;
• has no chips or peeling;
• is not subject to pigmentation when painted with dark varnishes.

Correction is done after the length is grown to the desired length.

Natural nails are strengthened and protected by nail lamination, a nourishing procedure that gives them a glossy, healthy look. By retaining moisture and nutrients, this treatment helps heal damaged nails and reduces their susceptibility to breaking and peeling. For at-home or salon use, a variety of products—including keratin-based solutions—are available, providing a quick and easy way to get longer-lasting, smoother, and more glossy nails.

Types of lamination

Lamination types:

1. Boost gel and a product with the addition of keratin. Example – boost gel from LCN with keratin. The component nourishes and regenerates the structure during growth, hiding flaws, irregularities and imperfections. Used for thinned forms that suffered from grinding and cutting the upper layer. Can be used as a transparent coating after removing artificial material, as well as for extensions with gel or acrylic systems.
2. Super-thin lamination – a gel is used that must be polymerized in a lamp. More often used to prepare and protect the plate before extensions or applying gel polish.
3. Serum polish – a gel with the consistency of low viscosity varnish is used, which is applied to the plate in two stages. The first layer protects the nail, and the second hides irregularities. Can be used for extensions or for dry manicure. The difference between serum and boost gel and super thin lamination in the method of application and use: coating in two stages; for all types of manicure. At the same time, the nails are nourished, the top layer is leveled, and they are protected from being filed.
4. Polishing the nails with wax or mineral paste – the plate is “sealed” in a protective mask. Such a process is laborious, but natural. Suitable for giving shine to the nail. Wax is not used for extension, since during the sawdust the wax coating is removed. Pastes and powder can be sawn and grinding.

The pastes’ mineral components absorb into the nail in the lamp, dry, and "envelop" the bed.

Necessary materials and tools

In order to create laminations beneath gel polish, gel, or acrylic, the following equipment needs to be ready:

• files for 180-240 grit and buff;
• milling device or scissors for cuticle;
• orange stick or fur;
• an invocated primer or bonder;
• degreasing and liquid for removing the sticky layer;
• brushes;
• Blessing napkins;
• biogel or remedy from another lamination system;
• finish coating;
• UV or LED lamp.

The drying speed of the biogel must be taken into account before covering the plate. In LED devices, the polymer hardens rapidly; in UV lamps and hybrids, it takes longer.

Lamination with varnish-serum

You can laminate at home or in a salon using varnish-serum. Choosing a lamination system is essential based on the kind of manicure that needs to be done.

The serums are:

• protein;
• vitamin;
• combined.

The first two are applied once for coating gel polish or nail extensions. Selecting combined ones that are added to the region of the regrown nail is essential when correcting. They effectively initiate an adhesion reaction with artificial material while also strengthening and nourishing the natural nail. You can use either protein or vitamin serum if you intend to use regular varnishes or do a dry manicure without coating.

The following steps make up the varnish-serum lamination process:

1. Preparation;
2. Buff 100/180 grit to clean the plate, remove manually or with cutters pterygium, junction of the side ridges and the "whisker" area. Degrease the plate with a product or alcohol;
3. Final stage. Apply the serum varnish in several layers with rubbing movements, drying each for 2-4 minutes. The first layer will seal the scales, “treat” it, the second self-leveling layer will hide the defects. The free edge is printed with a dry brush.

There might be a sticky layer on the lamination gel. A dispersion remover is used to get rid of it. Fruit oil is used to treat the cuticle. With the right lamination product, you can glue and level the plate in preparation for applying gel or varnish to it later.

Lamination with boost gel

There are two steps to applying Boost gel:

First, the nails are prepared for coating: the pterygium is cleaned, dust is removed from under the cuticle. It is recommended to clean the side ridges with a “flame” cutter.

In order to take off the coating:

1. A product that dissolves biogel is applied to the nail;
2. Within 20-30 minutes, the boost gel comes off the natural plate and is removed with a napkin;
3. The nail is degreased;
4. After removal, you can re-coat it with boost gel or a similar product to protect the plate and lamination.

The product is applied to the regrown areas of artificial nails or gel-polished nails, and the sticky layer is eliminated using lint-free wipes, a cleanser, or a product that dissolves the dispersion layer.

1. The laminating layer of biogel is removed with a solvent, even if the material was used as a modeling base. It is difficult and dangerous to file it off, since you can touch the natural nail.
2. Clips are used for dissolution: cut 10 tampons the size of a nail from lint-free wipes. Apply the product and attach to the plate.
3. Put on the clip and leave it for 20-30 minutes.

The plates are treated with alcohol or a degreasing agent after the clips are removed.

Biogel lamination

Apply a thin layer of biogel to the plate after it has been prepared, rubbing it in. After drying, the free edge is sealed. Nail gel lamination requires the use of an LED or UV lamp. Depending on the composition and power, drying will take one to four minutes.

• Before applying the laminating layer, it is necessary to carry out a dry or hardware manicure;
• Treat all fingers with cutters for cleaning the pterygium and opening the cuticle;
• Do not use cuticle softening oil.

Without removing the sticky layer, a second layer of gel is applied right away, and the drying process is then repeated.

Gels in various shades for coating and aligning the shape are available in some brands’ lines. Sometimes you can whiten your nails with light shades, and camouflage bases can conceal flaws. Primers are not required to be used before applying.

As with gels, it’s crucial to evenly distribute the biogel throughout the plate when using the "drop" technique. If gels and gel polishes are not used during the manicure, the sticky layer is eliminated after polymerization.

Lamination with polish

The plate’s preparation and polishing procedure:

• Sand the nails with a glass or ceramic file;
• Apply a polishing agent to the plate, the consistency of which resembles a transparent resin of medium viscosity;
• The silk coating is similar in texture to biogel with an ultraviolet effect.

The material can be used decoratively; you can apply powder or glitter underneath it to create a gradient manicure look.

How to do it at home

At-home nail lamination can be accomplished using polishing material, gel, or wax.

Let’s examine how to apply diamond lamination assistance!

1. Sand the plates and clean them from old coatings with a soft buff. Form the desired shape of the free edge with a file;
2. Degrease with alcohol or a special agent;
3. Apply two layers with a hard brush Help! rubbing movements, drying each layer for 2-4 minutes according to the instructions.
4. After polymerization, grind with a buff or an overlap with a top without a sticky layer.

Advantages and disadvantages

• Of the advantages, one can note the durability of the strength of the nails that are not injured, as in the case of working with a “bare” plate;
• Of the shortcomings, only the inability to remove the gel using a milling.

Review of funds

Rio Profi’s SSG System, also known as Super Strong Gel, is made especially for soft, dehydrated plates that need to be powered up and restored to their former strength.

• elastic coating has regenerating properties;
• perfectly seals the free edge;
• gluing the scales of the plate;
• "Heals" them from the inside.

The term "SSG system" refers to boost gels, which should only be used with a lamp. The 36-watt device has a maximum polymerization speed of two minutes.

A unique formula was used to create the restorative gel line F.O.X. Cover repair. created with a mild composition and keratin complex in the boost gel system specifically for the restoration and treatment of the nail plate. resistant to acetone and its byproducts. During the initial application, the entire cleaned bed where the nail has grown is covered with gel. Only when using the gel polish system can Fox Cover be used as a top coat.

LCN’s Boost Gel is a sophisticated product designed to coat quickly and provide a protective layer within the boost gel system. In acrylic and gel extension systems, LCN Boost Gel can be used as a base layer underneath the gel. A range of products from the LCN brand are also available for product removal without causing any harm to the nail plate. The price is determined by the functions and volume; a set can be bought separately from IBX.

IBX System is a company that specializes in making products for cuticle and nail restoration. Owners of damaged and brittle plates are advised to purchase a set of three items. The items are of the super-thin lamination variety, which is suitable for coating gel polish and applying extensions.

RIO for single-phase biogel Profi: used for extensions on the upper and lower forms, tips with low-viscosity gels, and polygel to strengthen the plate. Comprised solely of natural elements, the plate is robust and long-lasting, and its free edge resists breaking even when filed with cutters or files. Four minutes can pass during polymerization. It is best to stay out of the direct sunlight. The complex is a member of the super-thin lamination category, which includes both extensions and dry manicures.

IBD building gel is a product that combines material for shape modeling with plate bioprotection. Suitable for use as a base and lower form for extensions under polygel and for camouflage. alludes to the lamination system known as boost gel. The product does not have a sticky layer, according to the manufacturer. Appropriate for covering organic shapes to strengthen, level, and treat the plate.

Masura Healing Serum: This product works well for dry manicures or hardware manicures that use a two-step varnish-serum lamination system. The plate is strengthened and nourished by the base, which also replenishes the top layer and saturates it with microelements. Used once a week in courses: two layers. Masura mineral paste is another beneficial product. Perfectly seals the edges and polishes the plate, leaving it with a natural, healthy shine. Ideal for Japanese manicures. It is a component of the system of paste lamination.

CND RescueRXx is a keratin mask used for post-gel polish treatment, along with various extension systems. gives care and contributes to the plate’s durability and hardness. The products are from the boost gel lamination type, which works well with gel polishes and basic coatings and doesn’t need to be dried under a lamp. can be applied every day to build strength.

Irisk Professional: pastes and gels for nail plate treatment. Ideal for people with thinned, brittle, weak, or fragile nails. Mineral paste, which is applied with rubbing motions while maintaining an even and smooth surface, is a type of lamination that includes wax paste. Since the brand’s gels are boost systems, they must be dried.

The company Nano Professional is focused on producing goods for biolamination. Creates simple and complex products that can be combined or used alone for coloring, strengthening, and modeling. The boost gel application system uses both single and combined products, such as super-thin lamination.

Wax Mix Recipe

In wax lamination, a paste with a consistency similar to polygel is used.

You’ll need the following to make the paste:

• Beeswax;
• Oil solution of vitamin E and A;
• Cuticle oil.

Melt the wax completely in a water bath and mix in a few drops of oil. Once the mixture has cooled to room temperature, stir it. A cheap product that can help restore the plate and give it a healthy appearance is homemade wax.

Procedure for sealing:

• Completely degrease your hands.
• Rub wax into the plate and the side joints between the rollers.
• Go over the nails with a suede buff, grinding and polishing them in one direction.
• After the procedure, place your fingers in cool water for 1-2 minutes.

Long, severely dry, and brittle nails are not good candidates for this process. Since the wax has leveled healing properties, you cannot cover with gel or varnish.

How often to do it

Generally speaking, depending on how quickly the nails grow, lamination with gel systems can be done twice a month. Wax and polish should be applied once every two to three weeks, but the products should be used gradually; after three to four months, the plate is fully restored.

Share with friends!

Popular on the topic Care

A manual for preventing and treating foot calluses

Stock and sanitizing supplies for a salon

Pregnancy-related nail health: prevention and treatment

The characteristics and methods of foot massage

How to carry out SPA treatments at home

Hygienic requirements for a hair salon, manicure parlor, and beauty salon. Revised specifications for 2021

Winter nail care: guidelines for cuticle and hand hygiene

Exoderil treatment for skin and nail fungus

Choosing a hand cream based on the type of skin

Gehwol products to address skin and foot issues

Magazine Sections

Express your opinion or ask a question! Cancel reply

2 comments on “Nail lamination – procedure and review of products”

Aida

IBD designer has an oligomer of uoretan-acrylate. If it already contains a toxic material, how can it protect the nail?

Editors

Hi there, Aida! Although it is present in 99% of varnishes, acrylic oligomer’s formula varies. The component’s impact on the nail plate is dependent on the quality of the raw materials; a low-quality oligomer has a high likelihood of triggering an allergic reaction or causing issues with the nail plates. There won’t be much damage to the nails if the raw materials are of excellent quality. IBD is also produced in the USA, a country with strict regulations regarding product safety.

Procedure	Review of Products
Nail lamination is a process that strengthens and protects your natural nails by applying a special coat, creating a smooth, glossy finish.	Top products include IBX System for deep nail repair and Kinetics Nano Rhino for a protective shield that promotes nail growth.
The procedure helps in repairing damaged nails, giving them a healthy appearance and reducing peeling or breakage.	Essie Gel Couture offers a long-lasting shine, while OPI Infinite Shine provides a salon-quality finish with minimal effort at home.

A great option for people who want to improve and strengthen their natural nails is nail lamination. This process gives your nails a glossy, well-maintained appearance in addition to adding a protective layer. It can be done on a regular basis to maintain the best possible condition for your nails and is a great substitute for more involved treatments.

You can find a product that best suits your needs and nail type thanks to the variety that is available. Lamination can help maintain and restore the health of your nails, whether you choose to use DIY kits at home or seek professional treatments.

Try lamination if your nails are weak or brittle; it might be the answer you’ve been looking for. You’ll experience a noticeable improvement in the strength and

Video on the topic

Fox Cover & Repair + Fox Cover Lamain Correction Correction

Laminating LCN Boost Gel / Laminating of Nails

Nail lamination .

Bio lamination of nails Patrisanail | Viskose Gel

How to strengthen your nails? Review of the Rio Profi SSG nail lamination product.

STRENGTHENING nails FOX Cover & Repair + LAMINATION of nails FOX Cover. Nail care

LAMINATION OF NAILS WITHOUT WATER

How to do IBX correctly?