Pedicure at home on your own: types of procedures, step-by-step instructions, foot care

Taking good care of your feet is a crucial component of self-care, and having a pedicure at home may be a calming and fulfilling experience. It’s not necessary to be an expert to have gorgeous, well-groomed feet. Anyone can treat themselves to a spa-like experience without leaving the house if they have the necessary equipment and a little perseverance.

You can perform a variety of pedicure procedures on your own, each one tailored to your specific needs. Knowing the steps is essential to success, whether you’re treating yourself to a luxurious treatment or just basic maintenance.

You can try a variety of pedicures at home with the help of this guide, which offers step-by-step instructions and advice on how to take good care of your feet. You’ll find everything you need to maintain the best-looking and feeling feet, from prepping them to applying the finishing polish.

Classic or trim pedicure at home: description and materials

A classic pedicure combines the following steps in its procedure:

• soaking feet in water with subsequent removal of rough cuticle skin and pterygium using scissors or nippers, a pusher and an orange stick;
• correction of the shape and length of the nail plates;
• foot file or grater processing.

This version of the pedicure procedure is also known as trim because it involves the use of cutting tools, such as scissors or nippers.

The following supplies and equipment are needed to perform a trim pedicure at home:

• Foot bath
• Salt, soda, shower gel or liquid soap
• Large scrub
• Pusher, orange stick
• Nail file 180/220 grit
• Nail nippers
• Manicure scissors or skin nippers
• Grater or foot file of large abrasiveness 80/100 grit
• Toe separator
• Light moisturizer
• Cuticle oil
• Large napkins or towels
• Gel polish or varnish for decorative nail coating

Edged pedicure at home

Depending on the load on the legs, the procedure should be done at home once every 10 to 14 days. This level of intensity will enable you to prevent ingrown nails and cracks in the skin of your feet and legs. To get rid of rough skin in between procedures, it’s advised to sand your feet once every three to five days using a coarse-grained file.

A classic pedicure is simple to learn. Maintain high-quality tools and files for maximum effectiveness. Already, half the fight is won. You’ll need approximately one hour to finish it. You can switch to your preferred television show.

How to do a step-by-step classic pedicure:

1. In a classic pedicure, steaming your feet is a must. To do this, immerse them in a bath of water at 37-40 ° C for 10-15 minutes. Pre-add 1 tbsp. salt, 1 tbsp. to the water. l. soda and a little liquid soap or shower gel. Soda will additionally soften and whiten the skin, and salt will strengthen the nails and relieve swelling. You can also add a few drops of essential oil to the water, such as tea tree, lemon, rose or lavender.
2. Use a pusher or orange stick to push back the cuticle and clean the pterygium from the nail plates.
3. Use nippers to remove the length of the nails. Do not cut them too short, the recommended length is 2-3 mm.
4. By this point, the nails will have dried out a little, so you can shape them with a file. With a rectangular shape, it is still better to round off the corners a little so that they do not catch on socks or tights, and do not grow into the skin.
5. Use the sharp end of an orange stick to remove dead skin from under the nail plates and in the lateral sinuses. Do this very carefully so as not to injure the nail.
6. Use manicure scissors or cuticle nippers. Professionals recommend removing only rough dead skin, without fanaticism. The cuticle protects the nail along the perimeter, and if you cut it very short or injure it, then foci of possible infection with a high risk of inflammation due to contact with shoes, dust, floors are formed.
7. Now we move on to processing the feet. Use a grater or a large abrasive file to remove all the rough skin in the direction of the skin lines. It is recommended to do this not on wet, but on barely damp skin. If it dries out, it is enough to moisten it a little with your hand. A grater or file will remove rough areas in pellets. If there are cracks on the feet, then they must be processed with a grater strictly along the depression.
8. Apply a large scrub to the feet and massage the feet and the upper part. Rinse with water.
9. Make a decorative coating of nails with gel polish, shellac or regular nail polish. If gel polish is used, then alignment is not necessary. A thin layer of a classic base will be enough. Before applying it, treat the nails with a dehydrator and an acid-free primer for better wear of the coating. It is better to take a top without a sticky layer. Many masters recommend using a single-phase varnish for a pedicure, combining a base, gel polish and top at the same time.
10. Apply a light foot cream for quick absorption and cuticle oil. Give a light massage to relax your feet and improve the effect of the cosmetic product.

Precautions for edged pedicure

• Do not use hot water for the bath above the specified 37-40 degrees, even if the temperature above seems comfortable to you. Hot water draws moisture from the skin and also improves blood flow to the feet. If you accidentally get hurt while cutting the cuticle, the blood will flow more actively;
• To cut the cuticle, use only sharply sharpened tools, otherwise burrs cannot be avoided;
• Do not forget that tools that damage the integrity of the skin – scissors and nippers, require treatment even at home and even if you are the only one using the devices. Ideally, periodically soak the devices in a disinfectant solution, but in extreme cases, at least just wash them in soapy water and treat with an antiseptic, chlorhexidine, alcohol;
• If you use a grater or pumice stone with a reusable surface instead of replaceable files to treat your feet, change the device to a new one at least once a month. The porous structure of the pumice stone retains skin and moisture particles, which subsequently becomes a suitable place for the development of various microorganisms. You can also use a special pedicure machine to remove dead skin, but use it carefully, without strong pressure, so as not to damage the living skin.

Remember that there are instances when an edged pedicure is not appropriate.

• Diabetes;
• Fungal infection;
• Poor blood clotting;
• Proximity of blood vessels to the skin surface;
• Varicose veins.

With the correct technique, performing a pedicure at home can be simple and enjoyable. It offers a range of services to suit different requirements, from basic nail care to more extensive foot treatments. You can accomplish salon-quality results in the comfort of your own home by adhering to step-by-step instructions and taking proper care of your feet. This will leave your feet feeling and looking fantastic.

Hardware pedicure at home

For many novices who have never used the device before, the question is: how can I properly perform a hardware pedicure at home? We advise reading the link to find out which materials and attachments are best to use if you have no prior experience. Let’s investigate the specifics.

You’ll need the appropriate cutter attachments to tackle every trouble spot because a hardware pedicure is done without the use of cutting instruments and in a dry setting.

Supplies and add-ons for a hardware manicure at home:

• Device with a power of at least 30 W
• Diamond cutters: truncated cone, flame and ball
• Grinding sand caps and silicone grinders
• Foot cream
• Cuticle oil
• Decorative coating if desired

Without the right training, doing a hardware pedicure at home with your hands can be challenging. To prevent cuts and damage to the cuticle’s skin, you must firmly grasp the device’s handle while using the cutter.

Make sure your working hand has adequate support when handling attachments. For this, use your middle, ring, and little fingers.

1. Use the diamond cutter to move the truncated cone with a blue notch and slightly lift it cuticle. Use the same cutter to shape your nails.
2. Use a flame cutter with a blue notch to cut the cuticle even more and remove all the pterygium along the perimeter of the nail. Hold the cutter almost parallel to the nail plate, do not press hard.
3. Use a diamond-coated ball cutter to gently cut the cuticle, moving from the bottom up in the direction from the nail.
4. Use a silicone polisher to treat the cut area.
5. Use sand caps to treat the foot, metatarsus, toes. Move in even movements along the lines of the skin. Do not stop for a long time in one area.
6. Use a silicone grinding attachment to treat the foot and metatarsus again.
7. Apply cream to your feet and oil to the cuticle, do a relaxing or toning massage.

Taking good care of your feet at home is an easy but worthwhile habit. You can accomplish a professional-caliber pedicure that leaves your feet feeling soft, smooth, and renewed with the correct equipment and a little time.

You can easily incorporate various procedures, such as moisturizing treatments and exfoliating scrubs, into your routine by following the step-by-step instructions. This keeps your feet looking nice and healthy.

Taking good care of your feet not only makes them look better, but it also makes you feel better overall. You’ll be able to experience the daily benefits of gorgeous, comfortable feet with regular care.

Video on the topic

LIFE HACKS HOW TO DO A PEDICURE AT HOME

How to do a pedicure is a very important foot care procedure

PERFECT PEDICURE AT HOME: ALL THE SECRETS

Pedicure Clean Feet. Do it at home without wasting time and money.

PEDICURE FOR YOURSELF at home for beginners

HARDWARE PEDICURE Part 1: Foot treatment

Pedicure from start to finish ✅ For beginners the most complete video ✅ Foot and toes master class