Have you ever wondered why, despite following all the instructions, your lovely gel polish seems to chip or peel off at the tips? It can seriously interfere with your manicure routine and is a common frustration that many people experience. Although gel polish is supposed to last a long time, occasionally things don’t go as planned and your nails start to break sooner than you think.
The reason why gel polish might not hold up as long as you had hoped is multifaceted. It might be the result of poor application, problems with the base or top coats, or even routine activities that strain your nails. It will be easier for you to troubleshoot and find solutions to avoid these annoying issues if you are aware of these factors.
Fortunately, there are practical methods for maintaining the flawless, new-looking appearance of your gel polish. A few small changes can go a long way, from preparation to aftercare. We’ll go over some typical reasons for peeling and chipping as well as offer helpful advice on how to prolong the enjoyment of your manicure.
- Why the coating comes off as a film quickly and completely?
- Reasons for chipping of a gel-based coating on the tips
- What to do to avoid peeling and chipping?
- Video on the topic
- 25 reasons WHY gel polish, shellac peels off
- NAILS LAST ENOUGH FOR 3 DAYS|HORRIBLE PEELS|HOW TO STRENGTHEN VERY THIN NAILS
- I"ll reveal a little secret about why gel polish can peel off on the tips of the nails.
- HIDDEN reasons for gel polish peeling off! ❌ GEL POLISH DOESN"T LAST! Manicure for a subscriber 💟 PEELS AT THE CUTICLE
- Peeling of gel polish | Strengthening LIFE HACK
- 🤯 Gel polish DOES NOT HOLD! ⛔️ MISTAKES. REASONS. What to do? EXTENSION/COATING WITHOUT CHIPS AND PEELING 👍
- 😤Gel polish does not hold! Base peels off / Strengthening thin nails / We file the ends
Why the coating comes off as a film quickly and completely?
Gel polish application technique errors and inadequate nail preparation are linked to peeling off of the coating. The primary causes of this are as follows:
- Incorrect processing of the natural nail plate is one of the most common culprits why gel polish peels off along with the base. It is important to completely remove the cuticle, polish the nail plate. Poorly removed gloss and dust residues interfere with the adhesion of the base coat and the nail.When polishing, the main thing is not to overdo it and not to grind the nail plate too much. On a thin nail, the layer will hold worse, and when drying in a lamp, painful sensations will occur.
- Insufficient degreasing or skipping this step is a typical mistake of beginners. The fatty layer prevents the base from adhering well to the nail. It is necessary to wipe the plate with a napkin after polishing, paying special attention to the base of the nail and the area near the ridges.
- Using a primer or ultrabond dehydrates. The gel does not lay down well on a nail that is not dry enough, so skipping this step is not recommended.
- It is very important to follow the application technique and monitor the thickness of the coating: too much material will not polymerize completely, and a thin layer will not provide the required strength. The gel should not get on the nail folds and cuticles.
- The person doing the manicure needs to monitor the condition of their lamp. If the radiation power is insufficient, the product will not polymerize. After some time, the coating will begin to swell, burst and peel off.
- Using low-quality materials affects the final result. If the master or you decide to save on the base, top and pigment, then there is nothing to be surprised at the short-lived manicure.
Using goods from American producers or other reputable brands is advised. Combining resources from various companies is also discouraged, particularly for novices. Experienced masters usually discover their preferred manufacturers and products through trial and error.
It is impossible to completely rule out the impact of a body’s unique characteristics on the outcome. The same manicure can look different depending on them.
- Humidity has a negative effect on the durability of the coating, and some people suffer from excess hydration.
- On a thin nail plate, the gel holds worse, and the nail is less durable – there is a risk of breaking it. To avoid this, you need to strengthen the nail with gel.
- The presence of irregularities, bumps, cracks reduce the quality of adhesion of the coating and the nail. Before applying gel polish, you need to level the nail plate. Many masters do this with gel, simultaneously using it as a base coat.
- Taking antibiotics, antidepressants, diabetes, hormonal imbalances and even the phase of the female cycle can cause the coating to peel off.
Reasons for chipping of a gel-based coating on the tips
- The layer is not sealed at the end. Some masters are guilty of this, especially when working with short lengths. If you don"t paint the end, the coating will probably start to chip.
- Sometimes clients themselves smear the layer when they adjust their clothes, pick up their phone or put their hand under the lamp.
- Improper care after the procedure makes the manicure short-lived. It is better to avoid water for several hours before and after the procedure, but many girls neglect this.
- Gel polish is a fairly durable material, but it cannot withstand strong or frequent mechanical damage. Blows or scratches damage the integrity of the coating.
- You cannot adjust the length or file the nail yourself, otherwise the coating may crack.
- Thin nails will probably break off under the gel polish, thereby forming chips.
What to do to avoid peeling and chipping?
- Proper preparation. A few hours before the manicure, it is not recommended to soak your hands, take baths or do general cleaning. It is better to avoid contact with aggressive chemicals. It is recommended to use rubber gloves in this case.
- Correct treatment. For processing the nail plate and cuticle, it is better to choose a method without soaking. Classic edged manicure can be done in advance so that the hands dry well, but not before applying the coating.The most successful method is hardware (using a cutter). For sensitive and thin skin, choose a European manicure. Using an orange stick, the skin is carefully moved from the working surface to the edge. It is important to completely remove the cuticle and pterygium: ignoring the skin film on the nails affects the quality of the coating. Try not to damage the skin of the finger. Blood or hematomas will prevent high-quality application of gel polish.
- Grinding. For adhesion, it is necessary to polish the nail well. This should be done with a special buff. It is extremely important to treat the entire surface of the nail, especially near the cuticle and nail folds. If it is difficult to reach there with a buff, a nail file is used. Do this very carefully: a buff and a file with high abrasiveness scratch the skin a lot.
If you’re doing a manicure for yourself, it would be appropriate to concentrate on your own emotions; if you’re doing it professionally, it would be appropriate to concentrate on the client’s response. Avoid going overboard and don’t fully erase the plate.
Do not be lazy and redo the work if a chip forms. If you file without fixing it afterwards, the layer can break. If the breakage cannot be repaired by you or by a professional and the jagged nail is interfering with your life, you will need to file it down and apply a regular clear varnish.
- Use trusted manufacturers, do not buy cheap coatings made in China. You should not buy 3-in-1 or 2-in-1 products. Use products for step-by-step application.
- Follow expiration dates and storage rules. Jars with base, pigment and top should be kept in a dry, dark place.
- Monitor the condition of consumables: worn-out files can leave nicks on the end of the nail, and over time, buffs become covered with a fatty layer from hands and grinding.
- The LED lamp should be powerful enough for the coating to harden completely. Check the condition of the LEDs regularly, change them if the lamp design allows, or buy a new one. The lamp should be replaced every 3-6 months, depending on the intensity of use.
- Cutter attachments need to be changed every 2-3 months. The machine itself tends to loosen up, which causes strong vibration during use.
It is highly advised to exercise caution when dealing with unidentified producers of coatings and processing materials. Their use may be detrimental to one’s health in addition to being ineffectual. Burns from chemicals could occur, as well as damage to the nail plate and allergic reactions.
Taking precautions, using premium supplies and tools, and keeping up with technological advancements can help ensure that your manicure is not only gorgeous but long-lasting.
| Reason | Solution |
|---|---|
| Not properly prepping the nails | Make sure to clean and dehydrate your nails before applying gel polish. Use a nail primer to help the polish stick better. |
| Applying too thick layers | Apply thin layers of gel polish to avoid uneven curing and peeling. Each layer should be thin and evenly applied. |
| Using old or expired gel polish | Always use fresh gel polish. Check the expiration date and avoid using products that have been sitting around for too long. |
| Not curing the polish completely | Ensure you cure each layer of gel polish for the recommended time in your UV or LED lamp. Incomplete curing can cause peeling. |
| Overexposing nails to water | Try to keep your nails dry, especially in the first 24 hours after application. Excessive water can weaken the gel polish bond. |
| Using nails as tools | Avoid using your nails to open things or perform tasks that might put stress on them. This can cause chipping and peeling. |
| Not sealing the tips | Make sure to seal the edge of the nails with gel polish to prevent lifting and chipping at the tips. |
Gel polish is a great option for glossy, long-lasting nails, but when it starts to peel or chip, it can be annoying. Knowing the causes of these problems will enable you to have beautiful nails for an extended period of time. Inadequate application, such as failing to cure polish properly or omitting base and top coats, is a common offender. Additionally, natural oils and residues can hinder a strong bond between gel polish and your nails, so it’s imperative to make sure they’re ready for gel polish application.
The state of your nails is an additional thing to think about. Peeling and chipping of the nails is more common in those with weak or damaged nails. Your nails will become stronger and your gel polish will last longer if you moisturize your cuticles on a regular basis and stay away from harsh chemicals. Furthermore, pay attention to what you do every day—exposure to chemicals and water in excess can accelerate the fading of polish.
Take careful to take good care of your nails, use high-quality products, and apply makeup according to the correct procedures to avoid these problems. The performance of your gel polish can be significantly improved by paying a little extra attention to your nail care regimen. These pointers will help you have gorgeous, long-lasting nails that are free of chips.
If the tips of your gel polish are peeling off and chipping, there are a few common causes to consider. This issue is frequently the result of bad application techniques, like not sealing the edges or applying an excessively thick coat, as well as common practices like using your nails as tools or subjecting them to adverse environments. Apply the gel in thin, even layers, clean and buff your nails before applying it, and take care of your nails by wearing protective gloves and avoiding too much moisture to avoid these problems. You can extend the life of your gel polish and maintain its perfect appearance by using these tips.
