What is hardware pedicure and its quality criteria

A hardware pedicure is a contemporary method of taking care of your feet that forgoes standard equipment like files and nail clippers in favor of specialty machines. Because it provides a more targeted and gentle treatment, this technique is becoming more and more popular. It can be used on all skin types, including those with sensitive or problematic areas.

A professional uses a machine with various attachments to safely and effectively remove dead skin, smooth rough patches, and shape nails during a hardware pedicure. The procedure is not just about aesthetics; it’s also about keeping your feet healthy. Many people find this technique to be very beneficial as it reduces the possibility of cuts or injuries.

In order to make sure you’re receiving the best care possible, it’s critical to understand the hardware pedicure quality standards. This entails examining the salon’s hygienic requirements, the technician’s degree of expertise, and

The main differences between classic and hardware pedicure

The first and main difference is working with an electric machine with special attachments, as well as the lack of need for preliminary soaking of the feet. Hardware pedicure is performed dry. Without cutting instruments.
In some cases, the specialist can make a hygienic bath, and only then apply an antiseptic to dry skin. A hygienic bath lasting 3-5 minutes does not have time to nourish the skin with excess moisture.
Is hardware pedicure harmful? The procedure is completely safe and painless, allows you to work with problem and diabetic feet, acts as a preventive measure against fungal diseases.
The main advantage of hardware pedicure is its speed and painlessness. A professional specialist will perform the procedure in half an hour without any discomfort, risk of cuts and damage to the skin.

A step-by-step description of the procedure

A hardware pedicure involves lining up the nail plate, filing down calluses and corns, filling in any fissures, massaging in nourishing agents, and applying varnish or gel polish to the nail plate. The steps in the process are as follows:

1. Treatment of the foot with an antiseptic
2. Giving shape to the free edge of the nails (cylindrical cutter with diamond coating or diamond cylinder, speed 10,000-12,000 rpm)
3. Lifting the cuticle with a truncated cone, moving with the direction of the reverse movement back from the hand (from the center to the left) and vice versa (from the center to the right)
4. Removing and polishing the cuticle with a ball attachment with a red notch
5. Subungal calluses are removed with a diamond attachment needle with a blue or red notch. First from one side of the nail, then from the other, switching reverse modes at 8,000-10,000 rpm
6. A thin cylindrical attachment with a rounded end is used to work through the nail sinuses at a speed of no more than 10,000 rpm. You can grab fingertips at this stage
7. After working through the sinuses, a lint-free cloth is moistened with an antiseptic and the remaining dust is removed
8. With a double-sided tool, the sinuses along the lateral ridges are cleaned and the presence of ingrown nails is checked. Dirt is removed from under the free edge
9. Nails are ground and polished with silicone attachments of different sizes and abrasiveness, from coarser to softer. You cannot work with such attachments at high speeds, the recommended speed is 5000-7000 revolutions
10. Applying nourishing vitaminized oil to the skin of the cuticle and nails. Rubbing in with massage movements
11. Then the foot is processed using carbide attachments for old calluses. Or disposable sand caps – from harder to less hard in reverse, opposite to the direction of hand movement. Speed ​​- 7000-15000 revolutions
12. A carbide cutter of the needle-shaped type with a truncated tip is used to process cracks. The crack is processed higher on both sides. The edges are ground with a round attachment.
13. The feet are ground with a silicone-carbide cutter. The stage is performed with long stretching movements at a speed of 10,000-12,000 revolutions
14. With a silicone-carbide attachment of less abrasiveness or without any abrasive at all, polish the skin to a beautiful glossy shine
15. Apply a nourishing or restorative foot cream, rub in with light massage movements.

Every reusable cutter needs to go through a sterilization and disinfection process. Ideally, in a sterilizer that uses dry heat and then kept in craft bags. They are opened in front of you with this storage, and the master then starts the process. If you don’t see a sterilizer and the craft bags aren’t visible, make sure to inquire about how the cutters are cleaned and sanitized.

How not to saw through your nails

Novice masters’ work can result in cuts in the nail plate due to a number of mistakes.

• Choosing the wrong cutter and angle of work with the cutter

When working on nails and feet, the proper attachment is needed at each stage. Additionally, the master should be knowledgeable about selecting the cutters’ hardness (notches’ color). When working, long attachments should be nearly parallel to the nail.

• Incorrect grip of fingers and feet, strong pressure, insufficient support for the area of ​​the foot being worked on

When working on fingers, you should firmly hold them with your other hand to prevent the client’s abrupt movements from injuring them or twisting under the cutter. When rigidity is properly chosen for an attachment, cutting risks and the need for extra pressure during operation are reduced. There should always be a fix for the area being worked on. The working hand’s little finger or thumb, which stabilizes the fingers or foot during processing, can be used for this.

• Incomplete opening of the cuticle before removing with a ball attachment

It’s been discussed extensively that in order to prevent the attachment’s rounded edges from touching the nail, the cuticle must be well opened before being removed with a ball. We would like to remind you once more that a properly opened cuticle at an angle prevents cuts and lengthens the pedicure’s useful life without causing hangnails.

• Incorrect operation with reverse modes, speeds

Cuts and burrs can be avoided when the cutters’ rotation speed is properly adjusted. Reverse modes are also handled expertly by seasoned masters. This is what sets a professional apart from a novice, who has gained experience and understands how to avoid cutting something with a cutter that rotates in the wrong direction. To prevent the device from breaking, only the position where the cutter stops is used to switch between reverse modes.

Using specialized tools to gently remove dead skin, smooth calluses, and shape nails without the use of water or harsh chemicals, a hardware pedicure is a modern, effective way to take care of your feet. In order to ensure that your feet are left healthy, soft, and well-groomed, a high-quality hardware pedicure depends on the accuracy of the tools used, the technician’s skill, and the general comfort and safety of the procedure.

Cutters

In the classic set of an experienced master for performing hardware pedicure there should be 4 main cutters: cone, ball, needle, grinders and polishers for feet of various levels of hardness.
The hardness of the cutter is determined by the notch. Three colors are suitable for pedicure – green, blue and red. Cutters with green notches and diamond coating are for rough skin, cutters with blue ones are the most popular for working with cuticle skin, sinuses and sinuses of the nail, with red ones – for working with skin and sometimes with the nail plate. They are considered soft. Yellow notches indicate the softest cutters, which can be safely used on natural nails.

A hardware pedicure offers comfort and precision that traditional methods frequently can’t match, making it a modern and efficient way to take care of your feet. It is possible to maintain general foot health, shape nails, and remove calluses more gently by using specialized tools.

It’s crucial to consider quality indicators like expert equipment, skilled technicians, and a sterile, clean environment when selecting a hardware pedicure service. These elements guarantee a safe and enjoyable experience in addition to the greatest outcomes.

Maintaining excellent foot health can help your feet look and feel their best. Regular hardware pedicures can help. This method provides a dependable solution whether you’re dealing with specific problems or just want to keep your feet healthy.

Video on the topic

Hardware pedicure of the foot. Foot treatment techniques. Master class from podiatrist Ekaterina Zimina.

Hardware pedicure. Foot treatment. What is needed to perform a hardware pedicure?💫

Hardware pedicure – foot treatment / Hardware pedicure – foot treatment

WHAT TO CHOOSE? HARDWARE PEDICURE OR CLASSIC? Opinion of a podiatrist | MEDPED