What varnishes are suitable for stamping: tips

Without hours of practice or a steady hand, you can add intricate designs to your nails with ease using stamping nail art. It’s a creative and enjoyable process. Selecting the appropriate varnishes is essential to achieving those clear, intricate patterns.

In terms of stamping, nail polishes are not all made equal. Some may not transfer well from the stamping plate to your nails, while others may be too thin. A flawless appearance can be achieved by selecting the ideal varnish.

This post will discuss the kinds of varnishes that are ideal for stamping and offer some helpful advice to help you choose wisely for your upcoming manicure.

Classic stamping: review of companies

El Corazon stamping polishes are five times more pigment-containing than ordinary polishes, making them incredibly opaque! The fact that their fans adore them so much is not surprising.

You have to get used to Rio Profi gold and silver polishes because they harden gradually.

Additionally, businesses like Born Petty Top, Cads Stemp Polish, and Bluesky» offer high-quality prints.

Konad is a well-known pioneer in the production of premium stamping materials. Although they cost more than others, you would be surprised at how many designs there are. The Konad plate leaves a consistent imprint; even the tiniest lines are readable. The design is open and tasteful.

For printing, the manufacturer suggests using a specific varnish. It transfers to the nail flawlessly and has a formula that dries quickly. Konad cautions against using amateur varnishes, citing the inability to leave an imprint on them as justification. Is this accurate? Many nail design experts in practice are positive of the opposite. Consider their recommendations for varnishes that work well for stamping.

What to replace professional stamping varnishes with: acrylic paints

It is safe to say that nail design masters invented the method. They enjoy conducting experiments, researching the practical compatibility of materials and technologies, and occasionally they uncover important information.

Acrylic paint is a tool used by manicurists who work in design. These paints have finely ground pigment and dry quickly. Painting is done successfully with them. Using these paints for stamping has the benefit of not requiring you to act quickly until the varnish has dried. It’s simple to create a design on the transfer pad, smooth out any blemishes with a brush dipped in water, let the paint dry, and then carefully apply it to the nail. Apply a top coat of varnish to such prints.

Using a moist brush, you can make corrections to the drawing if something does not print as you intended. Based on empirical evidence, acrylic paint is comparably safe to use with varnish when stamping. No matter how good the varnish is, if you apply a design and it doesn’t print, you have to start over and use acetone liquid to remove the coating, repaint the base, and then print the design.

Stamping with gel polish (for professionals)

A lot of people are curious about the best gel polish for stamping. Appropriate transfer pads let you apply the gel to the nail with care and increase your stamping options. Here are a few nuanced details. For those who are unaware of the features of this technique, printing with gel polish is thought to be impossible. To improve adhesion, the stamping pad needs to be polished first. Second, the interior shouldn’t be hollow.

The gel polish needs to be spread out on a palette and exposed to light before applying. It will become more opaque and the transparent component will slightly evaporate. It can only be used to print the pattern after that. Using a brush, apply gel polish to the plate; use a scraper to remove any excess. Make smooth movements with the piston. There should be no pinched lines and a clear progression of the pattern. If certain details on the stamp don’t look great, you can fix them by using a brush dipped in clinker, or alcohol liquid.

In order for the top layer to polymerize, it is now crucial to slightly dry the gel polish under the lamp. This UV drying process takes roughly ten seconds. The time will vary slightly depending on the lamp and the specific gel polish used. It is possible to create multiple test prints ahead of time, identify the varnishes that work best for this type of embossing, and figure out how long to leave them in the lamp. Naturally, the master will not test the design on the client; instead, he will prepare the design ahead of time and be fully aware of all the details.

In order to apply a drawing to a nail, it must first be coated with colored gel polish. Next, the drawing is carefully transferred from the stamp to the nail without removing the dispersion. At this stage, you can use a brush dipped in cleanser to correct the design once more. The nail is sent to the lamp if everything checks out. Dry the cycle completely.

Rhinestones can be added before applying (it should have a sticky layer).

Stamping with gel and gel paint (for professionals)

The possibility of applying gel polish on gel polish has been demonstrated by the experiments of masters, most notably Yulia Biley, a luminary in the nail design world. Which other gels work well for gel polish stamping? anything with adequate pigmentation.

The background substrate’s dispersion layer is left in place when applying gels. It is dried once more if it produces too much volume, leaving only a slight stickiness.

Gel paint can be used for design, just like gel polish. usually employed to depict a grin in France. Such material cannot be pre-dried in the lamp if a sufficiently soft transfer pad is used. Nails take it well. After the standard time has been polymerized, cover the top with a sticky layer.

Stamping gel is similar to the gel used for laying out the white tip when modeling a French manicure. Unlike gel polish, it is not dried ahead of time. Roll the pad lightly over the nail and let it polymerize for the specified amount of time.

The stamping method can also be used to apply gel paint for modeling. Certain black gel polishes work well for the same thing. The foil is applied to the dispersion of the design once it has fully polymerized. Adjust as needed with a cleanser-dipped brush, then polymerize.

To guarantee the design transfers onto your nails with clarity and vibrancy, it is imperative to select varnishes with a thick consistency and rich pigmentation when stamping. The most reliable results are usually obtained with quick-drying, non-gel polishes, but specialist stamping polishes are the most reliable as well.

Reverse stamping

With the advancement of imprinting technology, a new feature for the transfer platform has emerged: the ability to add a button for your own creation. The technique was dubbed "reverse stamping." It has also been given access to an extra flat platform, to which the design is transferred.

Which varnishes work well for reverse stamping are of interest to many. the most easily printed on materials with a homogenous structure and high pigment content. It is not appropriate to include glitter, glitter, or crumbs if you want to leave a lasting impression. However, they can also be used to add even larger decorations, like stones or kamifubuki, in the next layer.

Technique of imprinting translucent varnishes

What about the colors of varnishes with a structure that is translucent? Neon, soft pastel, and berry tones in the reddish-pink spectrum work particularly well among them. It is impossible to create designs like the Venetian lattice without using colored paint on glass. The masters assert that these varnishes are appropriate for stamping, which is surprising. What’s the trick to using them?

There are two requirements to be satisfied: a clear silicone transfer pad is required. gives you the ability to regulate how much colored varnish seeps into the printed design. The application of translucent varnish to a white base is the second requirement.

These varnishes can only be colored with a silicone stamp. The video demonstrates how the master does it.

The question that now faces the masters is, "What varnish is suitable for stamping nails?" With confidence, respond, "Anything!"

Stamps of suitable varnishes

Expensive varnishes are not required to create a print. The bottle costs more because of every ingredient the manufacturer adds to it. In reality, the master just uses a volatile solvent and pigment. Preservatives and softeners are unnecessary; occasionally, the list of compositions is impressive. The backing of the nail protects it, so even the most inexpensive varnish won’t harm it.

All of this is considered when selecting varnishes (not gels!) that work well for stamping. Good highly pigmented varnish manufacturers go by very different names. It is safe to say that inexpensive varnishes that have a small bottle volume, like "Selenium" or "Golden Rose" for design, work well for the job.

Comparison of reviews of Konad and Golden Rose varnishes

Reviews of inexpensive varnishes and Konad stamping varnishes can be compared to observe the following pattern:

• Conad varnishes are less bright when printed than the corresponding Golden Rose varnishes.
• Conad varnishes are not intended for use in the technique of transferring translucent varnishes.

You can purchase a few basic professional varnishes and add the entire range of low-cost varnishes to your palette to create masterpieces.

To achieve a crisp and clean design when stamping, selecting the appropriate varnish is essential. Choose highly pigmented nail polishes because they offer the best visibility and coverage.

Shiny and metallic polishes can also be used effectively to give your stamping artwork a distinctive finish. It’s a fantastic method to try different things and see what suits your style the best.

Finally, keep in mind that improvement comes from practice. Try a variety of varnishes without fear to see which ones work best for you. You will be able to create gorgeous nail designs by experimenting a little to find the ideal combination.

Video on the topic

VALDBERIS STAMPING VARCHS #nails #mancure #stamping

Caleidoscope stamping varnishes | Testing | How to choose a working stamp | Pigmented varnishes

Which varnish to choose for stamping IN DETAIL | What to do if the varnish dries quickly | Answers to all questions